Triplett 9045 Datasheet Page 1

ModelTrue RMSDigital Multimeter Instruction ManualTRIPLETT 9045

10Triplett Model 90455: SPECIFICATIONS5.1 Display: 0.8" (20.3mm) high LCD5.2 Display Resolution: 6000 counts, 0000 to 59995.3 Overrange Indica

11Triplett Model 9045egatloVCDegnaRnoituloseRycaruccAVm006Vm1.0± )stigid5+gdr%5.0(V6Vm1V06Vm01V006Vm001V0001V1 ± )stigid5+gdr%8.0(:ecnadepmItupnI M01e

12Triplett Model 9045ecnatsiseRegnaRnoituloseRycaruccA006 Ω 1.0 Ω± )stigid5+gdr%0.1(K6 Ω 1ΩK06 Ω 01 ΩK006 Ω 001 ΩM6 Ω K1 Ω± )stigid5+gdr%0.2(M06 Ω K01

13Triplett Model 9045erutarepmeTegnaRnoituloseRycaruccA85- ° 293otF ° FtiehnerhaFeerged2± )stigid5+gdr%57.0(23 ° 401otF ° F ±5° F293 ° 257otF ° F ± )s

14Triplett Model 9045FRONT PANEL OF 904512346109578

15Triplett Model 90456: 9045 FRONT PANEL AND LCD DISPLAY1) LCD Display2) Test Probe Holders3) Data HOLD and Backlight Button4) Rotary FUNCTION Sel

16Triplett Model 9045 is displayed when the REL (sometimes called Delta) mode is activated. is displayed when the Diode Test mode is activated. is dis

17Triplett Model 9045The bargraph visually indicates how the input quantity compares with the mea-surement range of the meter. For example, if the met

18Triplett Model 90457.1.2 Auto Power Off The 9045 has Defeatable Auto Power Off. This power saving feature auto- matically turns the m

19Triplett Model 90457.1.5 REL Mode Press the (REL) button to make subsequent readings RELative to the present reading, or to “zero

2Triplett Model 904584-866 Rev A1/06CONTENTS PAGE1. Introduction 22. Safety Rules and Warnings 3 - 83. International Symbols 84. Product Features 95.

20Triplett Model 9045 To select the range manually, press the RANGE button. The first press of the button will turn off the Auto annunci

21Triplett Model 90457.2.1.3 Connect the test probes to circuit being measured. The LCD will display the DC voltage. Note the position of the

22Triplett Model 90457.2.3 DC Current Measurement WARNING!!!If the magnitude of the current to be measured is unknown, always start bysetting the met

23Triplett Model 90457.2.4 AC Current Measurement: WARNING!!!If the magnitude of the current to be measured is unknown, always start bysetting the me

24Triplett Model 90457.2.4.6 To set the range manually, press the RANGE button, repeatedly if neces- sary, to select the desired range. Observ

25Triplett Model 90457.2.6.1 Connect the black test lead to the COM jack, and the red test lead to the jack.7.2.6.2 Set the FUNCTION swit

26Triplett Model 90457.2.8 Measuring Capacitance WARNING!!!Do not connect a charged capacitor to the meter.Doing so may damage the meter or injure t

27Triplett Model 90457.2.9 Measuring Temperature WARNING!!!Do not attempt to measure the temperature of any surface that is electrically“live”. Fail

28Triplett Model 90457.2.10.3 Connect the test leads to the circuit to be measured, and read the frequency on the LCD display. Observe the p

29Triplett Model 9045 TRIPLETT PRODUCT RETURN INSTRUCTIONS In the unlikely event that you must return your Triplett equipment for repair, the follo

3Triplett Model 90452: SAFETY RULES & WARNINGS2.1 Read all instructions in this manual before using this meter. Failure to do so may resul

30Triplett Model 90458.2 Replacing Fuse:8.2.1 Remove the test leads from the meter.8.2.2 Remove battery cover.8.2.3 Remove the 3 screws from th

31Triplett Model 90459: ACCESSORIES9.1 The Triplett Model 9045 package contains the following items:The Model 9045 DMMTest leads for the 9045 (Tripl

32Triplett Model 904510: Triplett Three Year Limited WarrantyThe Triplett Corporation warrants instruments and test equipment manufactured by it to be

33Triplett Model 9045NOTES

34Triplett Model 9045NOTES

35Triplett Model 9045NOTES

Triplett Corporation One Triplett Drive Bluffton, OH 45817800-TRIPLETT FAX: 419-358-7956 www.triplett.com© Triplett Corpor

4Triplett Model 90452.10 Make sure test leads are properly inserted and seated in the meter’s input jacks. A loose test lead may cause the user

5Triplett Model 90452.20 Do not apply voltages to the input of the meter which are elevated above the earth ground potential by more than 600V

6Triplett Model 90452.30 Do not touch the metallic portion of one test lead if the other test lead is connected to a live circuit. The current

7Triplett Model 90452.39 Do not use the meter if it may have been damaged in transport. Failure to observe this precaution may result in damag

8Triplett Model 90452.47 Observe whether HOLD function is activated. The meter may not show the presence of dangerous potentials when HOLD is

9Triplett Model 90454: PRODUCT FEATURES4.1 True RMS AC Measurements to 750 Volts4.2 6000 Count Resolution4.3 61 Segment Bargraph4.4 Bl