Model 3526-B Digi-Probe Multimeter CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this instruction
The Model 3526-B has been designed with your safety in mind. However, no design can completely protect against incorrect use. Electrical circuits
Safety Is No Accident! MODEL 3526-B SPECIFICATIONS Ranges Resolution Accuracy DC Voltage 300mV, 3V 30,300, 500V 100μV +(1.5% reading + 5 digi
FUNCTIONAL DESCRIPTION 12435610789 1. Data Hold Button 8. Positive Test Probe 2. Range Hold Button 9. Battery &
The Continuity mode provides a means to determine if a low resistance (continuity) exists between two points without having to constantly watch the
3. The fuse may be replace at this time by removing it from its holder. Replace only with a fuse of the same type and rating specified. 4. Place
6. Turn power to the circuit off. Disconnect the test leads from the circuit under test. Measuring Resistance 1. Connect the black test lead to
c) If the measured voltage is between the reference limits, neither LED will light, invalid state. 4. The LCD will display the measured voltage.
Triplett Corporation One Triplett Drive, Bluffton, OH 45817 PH: 419-358-5015 FAX: 419-358-7956 1-800-874-7538 www.triplett.comThe Tripl
Comments to this Manuals