Triplett 9325 Datasheet

Model 9325True RMS AC/DC Clamp-On MeterInstruction ManualTRIPLETT84-8987/11

5.Read the temperature in the display. The digital reading will indicate the proper decimal point and value.WARNING: To avoid electric shock, be sure

to normal operation.Note: The HOLD feature will activate when the Backlight is turned on. Press the HOLD key again to exit Hold.RANGE BUTTONWhen the m

Triplett Three Year Limited WarrantyTriplett warrants instruments and test equipment manufactured by it to be free from defective material or workmans

contact ‘[email protected]’. ALL WARRANTIES IMPLIED BY LAW ARE HEREBY LIMITED TO A PERIOD OF THREE YEARS FROM DATE OF PURCHASE, AND THE PROVISIONS O

SafetyInternational Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further info

Remove the battery if the meter is to be stored for long periods.Always discharge capacitors and remove power from the device under test before perfor

1234 56 78910111.AC DC 2. 3.8.8.8.84.AUTO5.REL6.7.8.HOLD 9.°C,°F, μ,m,V,A,K,M,Ω,10.MAX MIN 11.Hz %y AC (alternating current) and DC (

SpecificationsFunctionAC Current(50/60Hz)AC Current(400Hz)DC CurrentDC VoltageAC Voltage(50-400Hz)ResistanceCapacitanceFrequencySensitivity:15VrmsTemp

Clamp sizeDiode TestContinuity Check Low Battery IndicationOverrange IndicationMeasurements RateInput ImpedanceDisplayAC CurrentAC Voltage bandwid

OperationNOTICES: Read and understand all warning and precaution statements listed in the safety section of this operation manual prior to using this

DC/AC Voltage Measurements 1.Insert the black test lead into the negative COM terminal and the red test lead into the positive V terminal.2.Set the f

Capacitance MeasurementsWARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any capac