Triplett 9325 Datasheet download pdf (Page 11)

to normal operation.

Note: The HOLD feature will activate when the Backlight is

turned on. Press the HOLD key again to exit Hold.

RANGE BUTTON

When the meter is first turned on, it automatically goes into

AutoRanging. This automatically selects the best range for the

measurements being made and is generally the best mode

for most measurements. For measurement situations requiring

that a range be manually selected, perform the following:

1.Press the RANGE button. The “Auto Range” display indicator

will turn off, The “Manual Range” display indicator will turn on

2.Press the RANGE button to step through the available ranges

until you select the range you want.

3.Press and hold the RANGE button for 2 seconds to

exit the ManualRanging mode and return to AutoRanging.

Backlight Button

The backlight function illuminates the display and is used

when the ambient light to too low to permit viewing of the

displayed readings. Press the button for two seconds to

turn the backlight on and press the button a second time to

turn the backlight off.

Battery Replacement

1.Remove the one rear Phillips head screw

2.Open the battery compartment

3.Replace the Requires One 9V battery

4.Re-assemble the meter

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Triplett 9325 Datasheet Page 11